- Ferrari Tailor Made
- Full service history
- Non-smoker
- Under 1,000 km
- 818hppower
- ≈400kmmileage
- 2023first registration
Photos
11 photosWhy this car is special
ModelA bridge between the buttressesWithout the coupé's closed rear screen the targa lost downforce, so Ferrari added a wing-like bridge to win it back.
On the coupé, vortex generators on the solid rear screen provide 10% of the rear-downforce gain over the 812 Superfast. The targa cannot carry them, so a bridge element now spans the two flying buttresses.
The bridge deflects the airflow onto the rear spoiler and, according to Ferrari, essentially restores downforce to the coupé's level. Because it behaves like a wing, it also reduces the drag penalty that a targa body normally brings.
Open-top comfort was engineered too: a flap in the windscreen header rail lifts the incoming flow over the cabin, and two apertures between the buttresses steady the air entering over the side windows.
ModelA carbon roof with its own berthThe Competizione A is Ferrari's targa homage to its open-top tradition, limited to 599 cars.
The removable targa top is made of carbon fibre, matching the carbon roll bars behind the cabin. When removed, it stows in a compartment shaped like the top itself, so it can travel with the car in any weather.
The rear was redrawn around flying buttresses that sit lower than the coupé's, which makes the car look lower in profile. With the top stowed the roll bars stand slightly proud, but in carbon they read as secondary elements.
Ferrari unveiled the A alongside the coupé on 5 May 2021. Production was capped at 599 cars, against 999 coupés.
Model830 cv and a 9,500 rpm red lineFerrari rated this 6.5-litre V12 at 830 cv, the highest output of any of its road-car engines at the time.
The engine develops 610 kW (830 cv) at 9,250 rpm and revs to 9,500 rpm, 500 rpm more than the 812 Superfast and, by Ferrari's account, the highest of any Ferrari combustion engine.
To get there, Ferrari fitted titanium connecting rods 40% lighter than steel ones, a crankshaft 3% lighter than before, and DLC-coated sliding finger followers derived from Formula 1.
Variable-geometry intake tracts change their length continuously to keep the torque curve full across the rev range, and the seven-speed dual-clutch gearbox shifts 5% faster than in the Superfast.
ModelEach rear wheel steers on its ownThe 812 Competizione models were the first Ferraris with independent four-wheel steering.
Instead of moving the rear wheels in sync, a new electronic system drives the left and right actuators individually, which Ferrari says improves positioning control and response time.
The aim is a front axle that reacts sharply to the steering wheel while the rear keeps a sense of grip and follows promptly. The system is part of Virtual Short Wheelbase 3.0, which links the electric front steering with the rear actuators.
Side Slip Control 7.0 ties these functions together with the E-Diff 3.0, F1-Trac and magnetorheological suspension control, using a shared control language across all systems.
This carCarbon bonnet blade and black stripesTwin black stripes over silver, meeting a blade of bare carbon.
The transverse carbon blade across the bonnet is a signature of the 812 Competizione, setting it apart from the 812 Superfast at a glance. This car was built through Ferrari Tailor Made, the programme for owners who want a specification shaped around them.
Over Glossy Aluminium, a special two-layer colour in the factory list, the black stripes and the carbon blade read as one graphic. From the driver's seat they lead the eye straight down the long bonnet.
This carCarbon air intakes and splitterExposed carbon set into a silver bumper, where the car draws in cooling air.
A naturally aspirated V12 of 818 hp needs a great deal of cooling, and the front of the 812 Competizione A is shaped around that demand. The splitter below manages the air passing under the car, keeping the nose settled as speed builds.
On this car the intake surrounds are in carbon fibre, an option confirmed in the factory list, and the carbon splitter continues the material across the front. Against Glossy Aluminium the contrast is crisp, technical and quietly assertive.
This carBlack forged wheelsForged 20-inch wheels in gloss black, with black calipers behind.
Forging compresses the metal into a denser, stronger structure, so a wheel can be lighter for the same strength. Ferrari pairs these wheels with carbon-ceramic brakes, whose discs stay consistent under repeated hard use.
This car's 20-inch forged wheels are painted in gloss, with carbon wheel cups and gloss black calipers, all recorded in the factory list. The dark corners frame the silver body and give the car a lower, more restrained stance.
This carCarbon diffuser and exhaustBare carbon beneath the tail, shaped to pull the car toward the road.
A rear diffuser accelerates the air leaving the underside of the car, lowering pressure beneath it and adding grip without the drag of a larger wing. Beside it, carbon louvres carry the same material across the rear corners.
The carbon diffuser is listed in the factory specification, and the square exhaust tip sits within it, the exit for a V12 that is at its most eloquent at high revs. From behind, this is the view most people will have of the car.
Car passport
Options from the factory list as given in the original listing. Codes as provided there.
Exterior 11
CALBBrake calipers in gloss blackCEHTCarbon fibre hardtopCEXDCarbon fibre rear diffuserCEXGCarbon fibre front air ventsCEXSCarbon fibre underdoor coversCFWCCarbon fibre wheel capsLOGOScuderia Ferrari shieldsPNT1Special two-layer paint, Glossy AluminiumRIMPGloss-finish wheelsRMSV20-inch painted forged wheelsTAILTailor Made programme
Interior 14
ALBCAlcantara boot carpetCIDHCarbon fibre interior door handlesCITZCarbon fibre upper centre consoleCLDTColoured interior detailsCSB1Seat belts in GrigioDATRCarbon fibre dashboard insertsDEDIDedication plaque in silverEMPHCavallino stitched on headrests in CharcoalFLMAAdditional coloured mats with logoRPMAAluminium rev counterRSCQLarge racing seats, checked patternRSESRacing seat lifterSTIXStitching in special threadSTCIColoured standard stitching
Technology and comfort 7
ACPLApple CarPlayAFS2Adaptive headlights with SBL functionELEVSuspension lifterHAW1Heat-insulating windscreenHOLKHomeLink garage door openerPAC3Front and rear parking camerasSND2Integrated audio system
Specifications
This car
- First registration
- 10/2023
- Mileage
- ≈ 400 km
- Power
- 818 hp (610 kW)
- Fuel
- Petrol
- Gearbox
- Automatic
- Exterior colour
- Glossy Aluminium
- Interior
- Alcantara
- Service history
- Full, according to the seller
- Individual programme
- Ferrari Tailor Made
- Location
- Germany
Model
- Engine
- V12 65°, 6,496 cc, naturally aspirated
- Power
- 610 kW (830 cv) at 9,250 rpm; 9,500 rpm limit
- Torque
- 692 Nm at 7,000 rpm
- Gearbox
- 7-speed dual-clutch (F1 DCT)
- Drive
- Rear-wheel drive
- Production
- 599 units; unveiled May 2021
Price and next step
Request this car
Leave your e-mail and we will get back to you about this car.
